RETAN TAC

 

 

1. PRODUCT IDENTIFICATION

Product Name

RETAN TAC

Supplier

S.C. RAOUL-DUVAL & Cie

7, place Léon-Meyer, B.P. 1414

F-76067 Le Havre Cedex, France

Phone (33) 2 35 19 66 20
Fax (33) 2 35 21 55 08
Urgency phone number (33) 2 35 19 66 20

2. PRODUCT COMPOSITION

Composition Combination of pyrogallic tannins for shrunken-grain leather
Dangerous ingredients NONE

 

3. HAZARD IDENTIFICATION

Under normal use conditions, this product is stable.

May give various organic acids under action of extreme heat.

The product is very astringent and can cause gastric disorders in case of ingestion and skin irritation.

4. FIRST AID MEASURES

Skin contact Wash with water
Eyes contact Wash with plenty of water
Ingestion Drink large amount of liquids and make vomit if person is conscious.
Inhalation Wash mucous membranes. If irritation persists, seek medical advice.

 

5. FIRE PRECAUTIONS/FIRE FIGHTING

All extinguisher types can be used.

The product may give off Sox, Cox, pyrogallol and gallic acid. As for every pulverulent powders, concentrated dust clouds may explode if there are ignition points.

Respiratory masks are recommended in order to take precautions against dusts and fumes.

 

6. ACCIDENTAL RELEASE

Workers' protection Wear personal protective clothes
Environment protection Collect the product. Wash residue with water.
Cleaning method Sweep up and put in drums or bags. Mix residue with sawdust or sand. Dispose of according to local regulations or incinerate.
Neutralisation In aqueous solution, the product precipitates the metallic salts and specially alumine sulphate, gelatine.

 

7. HANDLING & STORAGE

Handling Wear personal protective clothes and individual respiratory masks in order to avoid respiring dusts.
Storage Store in a dry place. Avoid contact of the product with metallic drums and foodstuff.

 

8. PERSONAL PROTECTION

Handling Wear individual respiratory masks in order not to respire dusts.
Hands Rubber or PVC gloves and protective clothes can be advised

 

 

9. PHYSICAL & CHEMICAL PROPERTIES

Appearance (colour) ochre
Form powder
Odour characteristic
pH (10% solution at 20°C) 3,0 +- 1,0
Density 0,5 +-0,1 g/cm3
Decomposition T°C > 200°C
Flammable T°C not available
Solubility in water at 20°C not available
Boiling point not available
Flash point not available
Melting point not available

 

10. STABILITY & REACTIVITY

Under normal use conditions, this product is stable. At high temperature, the product can decompose.

The product precipitates in presence of gelatine or metallic salts, such as iron, alumine.

 

11. TOXICOLOGICAL INFORMATION

We have no figure on toxicological values actually.

The preparation is made mainly with natural extracts of plants and exotic wood. Analysis on similar tanning extract gives the following figures :

DL 50 oral on rat : 3,100 mg/Kg

No disastrous effect, no sensitisation to this product have been reported until today.

As every pulverulent product the powder may provoke respiratory problems by inhalation, eyes irritation and gastric disorder in case of large ingestion.

 

12. ECOLOGICAL INFORMATION

Preparation made from natural tanning extracts. biodegradability is low. The product is very sensitive to metallic salts and is disposed of in waste waters under the form of mud by treatment with alumine sulphate. Although the effects on environment and waters are not disastrous, at the moment we have no figure on ecotoxicity.

 

13. WASTE DISPOSAL

Dispose of according to local regulations.

The product is eliminated of aqueous solutions by precipitation under the form of muds with alumine sulphate (formation of alumine tannate).

Elimination of residue and packing by incineration.

 

14. TRANSPORT INFORMATION

The product is not regulated.

 

15. REGULATORY INFORMATION

Health & Safety Regs.

EC Directives 76-464, 78-318, 80-68, 91-156
EC Directive 93-18 of 5th April 1993

Official French Gazette of 28th March 1993, Decree of 1th October 93 relative to taking off and water consumption as well as to disposals of any type, and specially,

Chapter VI Art. 60 water pollution
Chapter VII Art. 61 environmental evaluation
Chapter VIII Art. 63/64/65 control of effects on environment

 

16. OTHER INFORMATION

This product should be stored, handled and used in accordance with good industrial hygiene practices and in conformity with any legal regulation. The information contained herein is based on the present state of our knowledge and is intended to describe our products from the point of view of safety requirements. It should not, therefore, be construed as guaranteeing specific properties.

 

Material Safety Data Sheet

Edition : 18.07.01

Index : 0

Code : ARETAC

Document PC.074/A