SYNTEX LD1

 

 

1. PRODUCT IDENTIFICATION

Product Name

SYNTEX LD1

Supplier

S.C. RAOUL-DUVAL & Cie

7, place Léon-Meyer, B.P. 1414

F-76067 Le Havre Cedex, France

Phone (33) 2 35 19 66 20
Fax (33) 2 35 21 55 08
Urgency phone number (33) 2 35 19 66 20

2. PRODUCT COMPOSITION

Composition Product of formol condensation on phenolsulphonic acid and dihydroxydiphenylsulphone
Equivalence Replacement or substitution synthetic tannin
Dangerous ingredients NONE

 

3. HAZARD IDENTIFICATION

Under normal use conditions, this product is stable.

May give off SO2, SO3 and irritant fumes under action of extreme heat (> 500°C).

The product has an astringent effect. In case of prolonged inhalation, it can cause respiratory difficulties and in case of important ingestion, stomach and intestinal troubles.

Labelling Xi irritant
R 36/38 Irritating to eyes and skin
S 24/25 Avoid contact with skin and eyes
S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S 28 After contact with skin, wash immediately with plenty of water
S 37/39 Wear suitable gloves, and eye/face protection

 

 

4. FIRST AID MEASURES

Skin contact Wash with water
Eyes contact Wash with plenty of water
Ingestion Drink large amount of liquids and make vomit
Inhalation Wash mucous membranes and take medical advice in case of respiratory troubles

 

 

5. FIRE PRECAUTIONS/FIRE FIGHTING

All extinguisher types can be used. The product is non flammable but combustible.

People fighting against fire must wear respirators to be protected from irritant dust and fumes.

 

6. ACCIDENTAL RELEASE

Workers' protection Avoid respiring dust and wear respirators
Cleaning Sweep up and mix residue with wood saw or sand
Neutralisation Wash residue with water which should be collected and precipitated by the addition of metallic salts

 

7. HANDLING & STORAGE

Handling Wear masks to avoid respiring dusts
Storage Store in cool dry place. Protect from moisture.

 

 

8. PERSONAL PROTECTION

Handling Wear personal protective equipment
Hands Rubber or PVC gloves can be advised
Eyes Wear close fitting goggles
Breathing devices Approved respirator to protect against airborne dust

9. PHYSICAL & CHEMICAL PROPERTIES

Appearance (colour) white
Form spraydried powder
Odour N/A
pH (10% aqueous) 4,3 +- 1,0
Solubility good
Bulk density 0,7 +- 0,1
Decomposition T°C > 200°C
Flash point > 500°C
Boiling point not available
Melting point not available

 

10. STABILITY & REACTIVITY

Under normal use conditions, this product is stable.

Decomposition products : May give off SO2, SO3, nitrogen and irritant fumes under action of extreme heat.

Materials to be avoided : Product reacts with iron salts, heavy metal salts, gelatine and oxidising agents.

 

11. TOXICOLOGICAL INFORMATION

Rat injection : LD 50 > 5,000 mg/Kg

Tests carried out on similar products give the following results :

Rabbit skin : little irritant
Rabbit eyes : lightly irritant


 

12. ECOLOGICAL INFORMATION

We have no information available regarding effect on environment and biodegradability.

Free phenol content : < 50 ppm

EEC regulation concerning phenol evacuation in waters give as maximum content of free phenol : < 0,1 mg/l

 

13. WASTE DISPOSAL

In aqueous solution, the product is precipitated by metallic salts, specially iron salts.

Product and packing destruction : by incineration.

Dispose of according to local regulations.

 

14. TRANSPORT INFORMATION

The product is not regulated.

 

15. REGULATORY INFORMATION

Labelling Xi irritant
R 36/38 Irritating to eyes and skin
S 24/25 Avoid contact with skin and eyes
S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S 28 After contact with skin, wash immediately with plenty of water
S 37/39 Wear suitable gloves, and eye/face protection

 

Health & Safety Regs.

EC Directives 76-464, 78-318, 80-68, 91-156
EC Directive 93-18 of 5th April 1993

Official French Gazette of 28th March 1993, Decree of 1th October 93 relative to taking off and water consumption as well as to disposals of any type, and specially,

Chapter VI Art. 60 water pollution
Chapter VII Art. 61 environmental evaluation
Chapter VIII Art. 63/64/65 control of effects on environment

 

16. OTHER INFORMATION

This product should be stored, handled and used in accordance with good industrial hygiene practices and in conformity with any legal regulation. The information contained herein is based on the present state of our knowledge and is intended to describe our products from the point of view of safety requirements. It should not, therefore, be construed as guaranteeing specific properties.

 

Material Safety Data Sheet

Edition : 20.07.01

Index : 0

Code : ISYLD1

Document PC.074/A